Table of Contents
Introduction
SmartSHIELD Car Noise Sound Deadening Mat Heat Insulation Closed Cell Foam Self Adhesive Aluminum XPE Foam Glue Thickness 118 mil 36 Sq Ft and Noico Red 150 mil Noico Liner Car Heat and Sound Insulation Using Self-Adhesive Closed Cell Foam both present themselves as self-adhesive, closed cell foam options aimed at heat and sound control in vehicle interiors. The clearest decision points in the write-ups are form factor (roll vs. pre-cut sheets), stated thickness (118 mil vs. 150 mil), and the stated operating temperature limits (215°F vs. 190°F).
- Form factor: SmartSHIELD is described as a single roll (16 in. x 28 ft.) while Noico Red is described as a multi-sheet, pre-cut format.
- Thickness: SmartSHIELD is listed at 118 mil (3 mm); Noico Red is listed at 150 mil (4 mm).
- Temperature rating: SmartSHIELD is rated up to 215°F; Noico Red is described with an operating temperature up to 190°F.
- Stated design details: SmartSHIELD is described with an aluminum layer and XPE foam; Noico Red is described as closed cell PE foam with emphasis on water resistance and odor-free composition.
- Installation framing: Both are presented as self-adhesive; Noico Red is framed as eliminating additional bonding agents, while SmartSHIELD is framed as having a “very strong” adhesive backing.
For deeper product-by-product context, start with the full reviews of SmartSHIELD 118 mil and Noico Red 150 mil.
Key Decision Factors Identified From the Review Content
The comparison is mainly driven by how each product is packaged (roll vs. pre-cut sheets), how thick each is stated to be, how each describes adhesive-based installation, and what temperature limits and durability characteristics are explicitly stated (including Noico Red’s emphasis on water and odor resistance and SmartSHIELD’s emphasis on an aluminum layer and radiant heat reflection).
SmartSHIELD Car Noise Sound Deadening Mat Heat Insulation Closed Cell Foam Self Adhesive Aluminum XPE Foam Glue Thickness 118 mil 36 Sq Ft Overview
SmartSHIELD is presented as a high density closed cell foam insulation material intended for automotive noise insulation and heat management. The description states an aluminum layer paired with XPE foam and a self-adhesive format, with roll coverage listed as 36 square feet and roll size listed as 16 inches by 28 feet.
The thickness is listed as 118 mil (0.118 inches / 3 mm), and the operating temperature is described as rated up to 215°F. The write-up also describes the aluminum layer as reflecting radiant heat and notes “creased crosshatching” intended to disperse mid to high frequencies and help the material mold to curved surfaces.
For product-page access, SmartSHIELD is referenced in the write-up as a self-adhesive aluminum XPE foam mat, with emphasis on being manageable during handling and cutting.
Noico Red 150 mil Noico Liner Car Heat and Sound Insulation Using Self-Adhesive Closed Cell Foam Overview
Noico Red is presented as a dual-purpose liner aimed at both thermal and acoustic challenges in car interiors. The description states a polyethylene-based closed cell foam core and frames the product as having a self-adhesive backing intended to simplify installation and eliminate the need for additional bonding agents.
The thickness is listed as 150 mil (0.15 inches / 4 mm), and the material is described as offered in a pre-cut format across 36 square feet of coverage. The write-up also describes durability-related points, including that the material does not absorb water and remains odor-free.
For product-page access, Noico is referenced as self-adhesive foam insulation intended for a non-invasive installation approach without mechanical fasteners or liquid adhesives.
Head-to-Head Comparison: What the Evidence Shows
Thickness and stated build: SmartSHIELD is listed at 118 mil (3 mm) and described with an aluminum layer plus XPE foam. Noico Red is listed at 150 mil (4 mm) and described as closed cell PE foam with a polyethylene-based core.
Coverage and packaging: Both are described as covering 36 square feet, but SmartSHIELD is presented as a single roll (16 in. x 28 ft.), while Noico Red is presented as a pre-cut sheet system.
Temperature limits: SmartSHIELD is rated up to 215°F. Noico Red is described with an operating temperature up to 190°F and includes explicit “do not use” guidance for certain high-heat components (mufflers, catalytic converters, DPF, and similar parts).
Installation and handling framing: Both are presented as self-adhesive. SmartSHIELD’s adhesive is described as “very strong” and the product is described as easy to install, handle, and cut, while Noico Red is framed as peel-and-stick with reduced need for extra bonding agents and is described as easy to cut and trim to size.
If you want to cross-check product positioning and stated pros/cons in full context, see SmartSHIELD and Noico where the write-ups reference each product directly.
At-a-Glance Comparison Table
| Comparison point | SmartSHIELD Car Noise Sound Deadening Mat Heat Insulation Closed Cell Foam Self Adhesive Aluminum XPE Foam Glue Thickness 118 mil 36 Sq Ft | Noico Red 150 mil Noico Liner Car Heat and Sound Insulation Using Self-Adhesive Closed Cell Foam |
|---|---|---|
| Stated thickness | 118 mil (0.118 inches / 3 mm) | 150 mil (0.15 inches / 4 mm) |
| Stated total coverage | 36 square feet | 36 square feet |
| Stated format | Roll | Pre-cut sheets |
| Stated size details | 16 inches x 28 feet | 36 square feet (pre-cut format) |
| Stated operating temperature | Up to 215°F | Up to 190°F |
| Water absorption | Not specified in the available review details. | Does not absorb water |
| Odor | Not stated in the researched material. | Odor-free |
Which One May Be the Better Fit for Different Situations
If choosing mainly on stated thickness and packaging, SmartSHIELD is described as a 118 mil roll format, while Noico Red is described as a 150 mil pre-cut sheet format. That difference alone may matter if you prefer a roll you cut to length versus sheets intended for multi-panel placement.
If temperature limits are a primary constraint, SmartSHIELD is described as rated up to 215°F, while Noico Red is described with an operating temperature up to 190°F and includes explicit “do not use” guidance for certain high-heat components. For readers comparing within that constraint set, the SmartSHIELD and Noico listings referenced in the write-ups may be the fastest way to confirm the stated limits and cautions.
If durability traits like moisture resistance and odor-free composition are a deciding point, Noico Red is specifically described with both of those characteristics. SmartSHIELD is described more around its aluminum + XPE construction and radiant heat reflection rather than water/odor language.
Frequently Asked Questions
Are both products described as self-adhesive?
Yes. SmartSHIELD is described as self adhesive with a backing described as “very strong,” and Noico Red is described with a self-adhesive backing and a peel-and-stick approach intended to reduce the need for additional bonding agents.
What thickness is listed for SmartSHIELD vs Noico Red?
SmartSHIELD is listed at 118 mil (0.118 inches / 3 mm), while Noico Red is listed at 150 mil (0.15 inches / 4 mm).
Do both products list the same coverage area?
Yes. Both are described as providing 36 square feet of coverage, with SmartSHIELD presented as a single roll and Noico Red presented as a pre-cut format.
How do the temperature limits compare in the write-ups?
SmartSHIELD is described as rated up to 215°F, while Noico Red is described with an operating temperature up to 190°F and includes explicit “do not use” guidance for certain high-heat components such as mufflers, catalytic converters, and DPF.
How is the materials story described for each one?
SmartSHIELD is described with an aluminum layer and XPE foam (in a high density closed cell foam construction), while Noico Red is described as closed cell PE foam with a polyethylene-based core.
Closing Guidance
The decision between SmartSHIELD Car Noise Sound Deadening Mat Heat Insulation Closed Cell Foam Self Adhesive Aluminum XPE Foam Glue Thickness 118 mil 36 Sq Ft and Noico Red 150 mil Noico Liner Car Heat and Sound Insulation Using Self-Adhesive Closed Cell Foam is most cleanly made by matching the stated format, thickness, and temperature limits to your constraints. SmartSHIELD is presented as a roll-based option with a 118 mil thickness and a stated 215°F rating, while Noico Red is presented as a pre-cut sheet option at 150 mil with a stated 190°F limit and explicit high-heat cautions.
When you’re ready to dive deeper into the full context and phrasing of each write-up, revisit SmartSHIELD and Noico in the same sections where the details are discussed.