The Trademark Soundproofing Genuine RSIC-1 Resilient Sound Clip with Mounting Screws (10 Pack) is designed to decouple walls or ceilings in wood framed, steel framed, CMU, or concrete assemblies. This solution includes 10 isolation clips, 10 mounting screws, and a TMS installation guide. It is identified under model number RSIC-1 and is categorized within studio and acoustical treatment applications.
Table of Contents
Core Function and Design
This sound isolation clip system is intended for use in ceiling and wall assemblies where structural decoupling is required. According to the product description, clips are laid out in a 24 inch by 48 inch pattern, with spacing directly tied to load and performance specifications. Each clip is rated for a 36 pound load when spaced at 24 inches by 48 inches and is capable of supporting two layers of 5/8 inch drywall under those conditions.
The design creates separation between the framing structure and the attached gypsum board surface. By isolating the finished surface from direct structural contact, the system is positioned as a method to achieve additional STC improvement, with product materials stating gains of up to 15 STC points in sound reduction when used as specified. It is also described as UL fire rated.
For installations requiring structured decoupling in residential or studio environments, the RSIC-1 clip system is specified for compatibility with multiple substrate types, including wood framing, steel framing, CMU, and concrete assemblies.
Included Components and Configuration
The 10 pack configuration contains ten isolation clips and ten mounting screws. An installation guide from TMS is also included. The presence of mounting screws simplifies procurement by bundling required fasteners with the isolation hardware.
The product is packaged with a total item weight of 1.25 pounds and package dimensions measuring 7.52 x 6.14 x 2.17 inches. It is not discontinued by the manufacturer and has been available since January 6, 2012.
For projects requiring multiple units, the 10 pack configuration provides a defined quantity suitable for smaller-scale installations or sectional retrofits.
Performance Characteristics
This system is described as suitable for impact sound control and general sound reduction in wall and ceiling assemblies. The specified maximum load of 36 pounds per clip, when spaced 24 inches by 48 inches, aligns with its capacity to support two layers of 5/8 inch drywall.
Clips are arranged in a grid layout and are intended to interface with appropriate channel systems to maintain decoupling. The product description highlights its use in both residential and studio environments where structural isolation is required.
The manufacturer literature also notes UL fire rating status. Additionally, product materials state that installation of these clips can contribute up to 15 additional STC points, depending on assembly configuration and layout.
When planning ceiling or wall decoupling assemblies, installers evaluating the sound isolation clip kit should follow the included installation guide to maintain spacing and load parameters.
Installation Considerations
The clips are intended to be fastened directly to framing members or structural substrates appropriate to the project type. Approved fasteners are included in the pack, and spacing guidance is specified at 24 inches by 48 inches. Proper layout and consistent spacing are necessary to meet the stated load rating and performance claims.
The system is described as applicable for ceilings and walls. In practice, installers may combine these clips with compatible furring channels and drywall layers to construct a decoupled assembly.
For structured installations requiring defined clip spacing and drywall support capacity, the resilient sound clip solution is intended for use within established framing assemblies.
Pros
- Includes 10 clips, 10 mounting screws, and installation guide
- Rated for 36 pounds per clip at 24 inch by 48 inch spacing
- Supports two layers of 5/8 inch drywall under specified layout
- Designed for wood, steel, CMU, and concrete assemblies
- UL fire rated designation
- Product materials state potential gain of up to 15 STC points
Cons
- Performance claims are dependent on correct spacing and assembly configuration
- Limited to a 10 clip quantity per pack
This clip system is intended for use in structured decoupling applications where defined load capacity, specified spacing, and compatibility with common framing types are required. Reviewing the installation guide and confirming assembly requirements can help determine whether this configuration aligns with the intended wall or ceiling build.