HOMBYS 72 × 40-Inch Sound Blanket: Echo Control vs Soundproofing

Editorial verdict: a hanging absorber, not a soundproof wall

The HOMBYS 72-by-40-inch blanket is a relatively small, grommet-hung textile panel intended for room-acoustic treatment. It may be useful where a portable fabric surface is wanted near a microphone, on a reflective wall, or in a temporary recording setup. It is not a tested replacement for a sealed sound-isolation wall, door or window. HOMBYS itself describes this product as sound absorbing rather than soundproof. We have not independently tested this blanket or located a product-specific absorption-coefficient or sound-transmission-loss report.

Before choosing it, separate two questions: Do you want to reduce reflections within a room? A fabric blanket can be one element of treatment. Do you want to stop voices, traffic or music passing through a partition? This listing does not establish that capability. The HOMBYS product page is our primary source for the advertised construction and dimensions, not evidence of independent acoustic testing.

Black HOMBYS hanging sound blanket with stitched fabric and top mounting loops
HOMBYS blanket product image showing its hanging format and stitched textile surface. The photograph does not demonstrate acoustic performance.

What the 72 × 40-inch version actually provides

Manufacturer-listed detail What it means for a buyer
72 × 40 inches Nominal rectangular face area: 2,880 sq in, or 20 sq ft (about 1.86 m²). Actual usable coverage may be less with folds, drape and mounting gaps.
About 4.4 lb Choose support hardware for the load and the substrate; verify the supplied variant.
Nine grommets Provides hanging points, but does not specify safe anchor spacing, load rating or ceiling approval.
Woven polyester with 750 GSM recycled microfiber filling Describes textile construction, not a laboratory-rated absorption coefficient or sound-blocking result.
Machine washable, according to HOMBYS Follow the care label on the delivered item; the manufacturer says not to use it as a moving blanket.

These details apply to the advertised 72 × 40-inch variant. The brand lists other sizes with different weights. Confirm that the retailer is supplying the intended size before ordering; do not transfer specifications between variants.

Which noise problem are you trying to solve?

Your goal Is this blanket a sensible starting point?
Soften reflections near a podcast or voice-recording position Potentially, as a movable treatment surface. Placement and total coverage matter; test the recording before making further purchases.
Reduce an audible flutter echo in a small room Possibly, but 20 sq ft may be insufficient for a large reflective space. No frequency-specific performance is verified here.
Prevent speech from passing through a wall or doorway No demonstrated solution. Look at gaps, mass, seals, flanking paths and complete tested assemblies instead.
Make a drum kit inaudible to neighbours No. A blanket or rug is not proof of structural vibration isolation or a rated sound barrier.
Make a temporary, non-permanent recording backdrop Potentially practical if hung securely with safe clearance, but the acoustic benefit is unmeasured.

The distinction between absorption, reflection and transmission is fundamental in room acoustics; the Acoustical Society of America’s classroom-acoustics guide explains these different sound paths. A blanket’s fabric density alone cannot be translated into a decibel reduction through a wall.

Placement and mounting checks

  1. Identify the reflective area. Start near the problem source or reflection path, then compare recordings or listening conditions before and after hanging it.
  2. Check the structure. Match hooks, rods or anchors to the wall or ceiling substrate and total suspended load. Nine grommets do not eliminate the need for proper support.
  3. Keep clearances. Do not hang fabric against heaters, hot fixtures, fire equipment, ventilation openings or moving hardware. No fire-rating or flame-spread certification for this exact configuration has been verified for this article.
  4. Avoid treating it as a seal. A hanging blanket commonly leaves edge and bottom gaps. Do not assume it will block noise at a doorway or window.
  5. Verify care instructions. Follow the delivered label and manufacturer’s cleaning instructions. Do not use the blanket as a protective moving blanket merely because it looks similar.

Strengths and limitations

  • Useful feature: portable hanging format, with an advertised 20-sq-ft rectangular face area and multiple mounting points.
  • Useful feature: HOMBYS supplies size, approximate weight, fabric and care information for buyer planning.
  • Important limitation: no independent NRC, frequency-band absorption or STC/transmission-loss figures for this exact item are established here.
  • Important limitation: a single blanket is not a substitute for acoustic construction, and results depend on room, placement and the area treated.
  • Commercial uncertainty: this article does not verify current Amazon stock, price, colour or delivery terms.

Before buying

Confirm the 72 × 40-inch size, black colour and grommet count on the current offer. Check whether your actual problem is room echo rather than noise transmission, and whether you can mount the panel safely. If you want a direct comparison with a different studio-blanket product, see our HOMBYS versus MABOZOO blanket comparison; compare size, mounting and verified evidence rather than promotional wording alone.

The 72 × 40-inch HOMBYS marketplace listing is a possible purchase route, but verify the exact variant and current seller terms on arrival. Affiliate disclosure: We may earn a commission from qualifying purchases made through this link, at no additional cost to you. This is an evidence-based listing review, not a hands-on acoustic test.

Bottom line

Consider this blanket for a removable textile treatment surface when your goal is to experiment with reflections inside a recording space. Do not buy it on the assumption that its weight, 750 GSM filling or nine grommets guarantee a measurable soundproofing result. A documented product-specific acoustic test would be needed to make more precise performance claims.