MYFAMIREA vs SGM Black: Which 80 mil Pack?

MYFAMIREA and SGM Black sell aluminum-faced butyl automotive damping mats with nominal 80 mil thickness, but the packages cannot safely be treated as identical 36 sq ft kits from their original Amazon links. MYFAMIREA’s matched original ASIN describes 34 sheets and 36 sq ft. SGM independently manufactures a 36 sq ft, 34-sheet pack, but its original linked ASIN is also associated with a distinct 10 sq ft, 10-sheet SGM kit. The comparison below identifies that size conflict instead of selecting a larger retail package without proof.

Commerce integrity correction: This page originally labeled its SGM Black Amazon ASIN B09HPWP53S as an alternative MYFAMIREA link, and its second image was blank. The original two destination ASINs remain unchanged, but the on-page label now correctly identifies SGM, and a verified existing SGM Black source-review image replaces the empty placeholder. No new affiliate destination was invented or substituted.

How 80 mil butyl damping works

Both product families use self-adhesive butyl-mastic and aluminum-facing material intended to reduce vibration of accessible automotive sheet-metal panels. A high-quality bond can help control ringing and rattles in some situations. These are not substitutes for door seals, correctly designed airborne noise barriers or repairing loose mechanical components. Matching nominal thickness does not establish equivalent formulation, adhesive strength, weight or acoustical performance.

MYFAMIREA 80 mil: the 34-sheet, 36 sq ft format

Existing SPD source-review image associated with MYFAMIREA 36-square-foot 80-mil butyl automotive mat
Site-owned MYFAMIREA source-review media for the original 36 sq ft butyl mat family.

An ASIN-specific MYFAMIREA product record associates original B0FQ9T8K8N with 80 mil / 2 mm adhesive butyl mat, 34 sheets, 15.7 × 9.8 inches each, and a marketed 36 sq ft total. The geometric sheet area is 34 × 15.7 × 9.8 ÷ 144 ≈ 36.32 sq ft. The small difference from the rounded headline does not establish a different pack; it should be considered a nominal advertised area and not the usable installed coverage after cutting.

MYFAMIREA describes a foil/adhesive/butyl layered construction with embossing or lines that can help an installer observe whether the mat has been pressed against the substrate. It markets thermal reflection and road-noise suppression but does not provide a matched third-party vehicle result verifying a specific reduction. A foil face does not independently certify direct exhaust contact or safe installation near every heated component.

The supplier mentions doors, roof, trunk and interior floor panels. Those are generic automotive use cases, subject to access, drain holes, side-airbag clearance, wiring and the vehicle’s own construction. See the published MYFAMIREA source review and verify the original MYFAMIREA Amazon product.

SGM Black 80 mil: separate manufacturer 10 and 36 sq ft options

Existing SPD SGM Black 80 mil automotive butyl-and-aluminum mat source-review image
Verified site-owned SGM Black review asset; exact original Amazon pack size remains buyer-checkable.

SGM Techno’s manufacturer 36 sq ft page names SGMBLK8036, 34 sheets sized 15.7 × 9.8 inches and 80 mil / 2 mm thickness, so its stated piece geometry totals approximately 36.32 sq ft, much like the MYFAMIREA 36 sq ft product. But SGM also sells a distinct SGMBLK8010 10 sq ft product containing 10 sheets of 14.7 × 9.8 inches. Its geometry is approximately 10 sq ft.

Both sizes exist in SGM’s own catalog. The problem is original Amazon variant identity: one ASIN-matched SGM retailer record ties the original B09HPWP53S to 10 sq ft / SGMBLK8010, while a second matched record ties the same ASIN to 36 sq ft / SGMBLK8036. These are different packs, not two correct descriptions of a single fixed physical shipment. Readers must verify the selected seller’s actual manufacturer part number and sheet count.

SGM markets butyl mastic and foil construction with self-adhesive application and claims an operating temperature range from −49°F to 212°F. The manufacturer also asserts better efficiency percentages over competitors; those are promotional comparisons lacking a directly applicable independent MYFAMIREA head-to-head test here. We do not infer better cabin performance from a material’s stated temperature tolerance or higher nominal package surface.

See the published SGM Black parent review and verify the original SGM Black Amazon offer. This link was incorrectly labeled as MYFAMIREA in the earlier article; it is now assigned to the right product and retained unchanged for route continuity.

Check the correct ASIN and pack before comparing price

Decision factor MYFAMIREA SGM Black
Original Amazon ASIN B0FQ9T8K8N B09HPWP53S
Brand/product role Adhesive aluminum-faced butyl damping Adhesive aluminum-faced butyl mastic
Nominal thickness 80 mil / 2 mm 80 mil / 2 mm
Source-supported 36 sq ft package 34 × 15.7 × 9.8 in SGMBLK8036: 34 × 15.7 × 9.8 in
Another original-ASIN-linked package No competing size proven in the reviewed record SGMBLK8010: 10 × 14.7 × 9.8 in
Advertised coverage if both 36 sq ft 36 sq ft 36 sq ft
Original retail variant certainty Matched 36 sq ft ASIN record 10-versus-36 sq ft collision unresolved
Independent measured same-car acoustic advantage Not established Not established

If the actual selected SGM product is the 36 sq ft SKU, the two packages are broadly comparable in advertised material area and nominal thickness. If the 10 sq ft SKU is delivered, MYFAMIREA’s advertised pack is 3.6 times the area. That ratio compares package surface only, not improved noise suppression or cost-effectiveness. Without current verified checkout options and price, claiming one has a better price per usable square foot would be misleading.

Installation planning and safety

Map the particular vibrating metal surfaces rather than simply installing a full box across everything visible. A door has moving glass, moisture drains, airbag paths and service openings. A trunk or floor contains wiring, fixings and trim points that must remain accessible. Use the chosen manufacturer’s cleaning, drying and roller-pressure instructions for complete contact with properly prepared metal. If the underlying part is loose, repair the mechanical fault first.

  • Confirm the selected ASIN, SGM SGMBLK8010 or SGMBLK8036 model, piece count and thickness.
  • Estimate true accessible metal and cutting waste before comparing delivered package cost.
  • Do not block airbag deployment, restraints, window regulators, electrical modules or water drains.
  • Do not regard foil-facing marketing as certification for direct engine/exhaust heat exposure.
  • Reinstall and check every moving and latching component after application.

Frequently asked questions

Is SGM Black always 36 sq ft?

No. SGM produces separate 10 and 36 sq ft packs, and retailer records attach both variants to the original comparison’s SGM ASIN.

Are MYFAMIREA and SGM identical because both offer 34 sheets?

No. Their similarly sized 36 sq ft packs do not establish the same chemistry, adhesion or vibration performance.

Was the original article’s second Amazon link really MYFAMIREA?

No. ASIN B09HPWP53S identifies the SGM Black product family. Its visible label in this comparison has been corrected without changing the destination.

Is 80 mil a guaranteed sound reduction?

No. It describes nominal thickness; results vary with material, panel and installation.

SPD’s decision

MYFAMIREA has a clearly matched 36 sq ft package record. SGM’s 36 sq ft option is also manufacturer-documented, but the original Amazon ASIN has conflicting 10 and 36 sq ft associations. Compare actual selected manufacturer parts and current pack quantities before buying.

Affiliate disclosure: Both original Amazon destinations in this article are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Good luck and happy soundproofing!