VEVOR 50 mil and MYFAMIREA 80 mil are both peel-and-stick foil-faced butyl mats for automotive sheet-metal vibration, but their listed packages prioritize different sizes and thicknesses. The VEVOR manufacturer advertises 47 sheets and 52 sq ft at 50 mil; the MYFAMIREA retailer record lists 34 sheets and 36 sq ft at 80 mil. Those two figures do not prove one material reduces vehicle noise more than the other.
Evidence scope: this is a specification and DIY decision comparison using VEVOR’s current manufacturer page, an ASIN-matched MYFAMIREA listing, and the published SPD source reviews. We have not purchased both kits or measured results in the same car. Where source pack dimensions differ from advertised area or the exact Amazon SKU cannot be matched, the difference is disclosed rather than silently reconciled.
What the mats are designed to do
These are adhesive panel-damping products: they are pressed onto clean vehicle metal to manage local resonance and unwanted panel vibration. They are not an airtight airborne-noise barrier, a replacement for a failing door seal or a certified firewall heat shield. Good installation requires attention to material bonding, surface condition, safety components and location—not merely the number of square feet or mils on the product page.
VEVOR: nominal 52 sq ft of 50 mil butyl material

VEVOR’s model 6003-128mm-black listing specifies 50 mil (about 1.3 mm) material with an aluminum surface, butyl middle layer and pressure-sensitive adhesive. The selected configuration advertises 52 sq ft and 47 precut sheets. VEVOR’s specification table lists each piece as 9.8 × 15.7 in, which geometrically totals 47 × 9.8 × 15.7 ÷ 144 = approximately 50.22 sq ft. Elsewhere its description calls the pieces 14.5 × 10 in. These are internal source inconsistencies and are not proof of a particular delivered package area.
VEVOR lists its butyl mat as a multi-layer material with manufacturer-advertised thermal, moisture and fire properties. The product family also includes separate 80 mil butyl kits and 200 mil foil-faced foam options, which have different quantities, thicknesses and acoustic roles. Never transfer the listed attributes of those other options onto this 50 mil comparison.
The original Amazon B0CPY437BS route is retained. Its monitored integrity does not establish the precise selected VEVOR retail variant in the current listing. Confirm model 6003-128mm-black, 50 mil and 47 pieces rather than assuming the ASIN stays on one option. See the VEVOR standalone review and check the VEVOR retail offer.
MYFAMIREA: thicker 36 sq ft advertised kit

An ASIN-specific product specification identifies B0FQ9T8K8N as a 34-piece, 36 sq ft butyl and aluminum product with stated 80 mil (2 mm) thickness. Each piece is listed as approximately 15.7 × 9.8 inches; 34 × 15.7 × 9.8 ÷ 144 equals 36.32 sq ft. That small difference is consistent with nominal packaging and rounded measurements, unlike an assumed acoustic performance percentage. The product is marketed for doors, trunks, cabin floors and similar vehicle panel locations.
Retailer language about a three-layer construction includes foil face, butyl-based dampening compound and adhesive backing. We have not located a comparable independent same-vehicle trial or complete material fire approval for this exact ASIN. A 2 mm profile can be useful in some projects, but it also occupies more depth than 1.3 mm; trim clearance, harness paths and total added weight matter.
The standalone MYFAMIREA article has further product details. Inspect the exact MYFAMIREA listing before ordering.
Side-by-side comparison
| Decision point | VEVOR 50 mil family | MYFAMIREA 80 mil kit |
|---|---|---|
| Original Amazon ASIN | B0CPY437BS | B0FQ9T8K8N |
| Manufacturer/retailer-described area | 52 sq ft advertised (geometry inconsistent) | 36 sq ft (36.32 from listed dimensions) |
| Pieces | 47 | 34 |
| Nominal thickness | 50 mil / 1.3 mm | 80 mil / 2 mm |
| Material class | Aluminum foil and butyl damping | Aluminum foil and butyl damping |
| Construction advantage to assess | More nominal pack area; thinner profile | Greater nominal thickness; fewer sheets |
| Direct comparative dB test | Not found | Not found |
Nominal pack area differs by 52 − 36 = 16 sq ft, and 52 ÷ 36 ≈ 1.44. These are only advertised area comparisons. Because the VEVOR sheet dimensions don’t calculate to exactly 52 sq ft, measure your usable project surface and allow cutting waste before purchasing.
Which mat should fit your project?
Choose based on the area that can actually be treated after allowing for openings. A person covering several accessible door skins might value VEVOR’s broader advertised package. Someone with space behind trim who prefers MYFAMIREA’s 80 mil profile may choose its smaller set. Neither can be awarded a guaranteed acoustic winner without comparable tests on metal panels and the finished vehicle.
For panel resonances, the position and adhesive bond can be more important than treating every possible square inch. For airborne road noise, window seals and other vehicle construction features may need a different approach. Treat mats as one step in a scoped installation plan.
Safe installation sequence
- Confirm both exact ASIN variants, dimensions and shipped quantity before checkout.
- Remove loose material, deal with water or rust and clean/dry the metal.
- Dry-fit sheets, then peel and roll according to manufacturer guidance.
- Do not block door drains, moving windows, wiring or seat/airbag mounts.
- Check trim clearance, especially for the thicker 80 mil MYFAMIREA material.
- Do not use foil as a substitute for approved thermal/fire shielding near engine components.
Frequently asked questions
Does 80 mil damp twice as much as 50 mil?
There is no valid linear dB conclusion from these dimensions. Formulation, adhesion, foil construction and panel response all influence damping.
Why does VEVOR list different sheet dimensions?
Its manufacturer specification table and sales description disagree, so the 52 sq ft figure must be understood as an advertised nominal pack amount. Verify the delivered size.
Which gives more square footage?
The advertised VEVOR 52 sq ft kit is nominally larger than the MYFAMIREA 36 sq ft kit. This does not mean it performs better in the same car.
Will either cure noise through a leaking door seal?
No. Adhesive metal damping and weather sealing address different noise paths.
SPD’s decision
Evaluate VEVOR for a larger measured damping job and MYFAMIREA for a moderately sized kit with an 80 mil profile. Verify the VEVOR selected model carefully and prioritize clearance, bonding and safety above unsupported decibel claims.
Affiliate disclosure: The Amazon links above are affiliate links. As an Amazon Associate I earn from qualifying purchases.
Good luck and happy soundproofing!