Affiliate disclosure: This article contains affiliate links. We may earn a commission if you purchase through them, at no additional cost to you.
Quick verdict: known ten-sheet pack versus an SGM size choice
Amazon Basics’ ten-sheet automotive sound-deadening mat and SGM Black’s 80-mil butyl mat are both designed to damp resonance in suitable vehicle panels. However, the original Amazon Basics ASIN clearly identifies ten sheets measuring 14.5 × 10 inches, while the original SGM ASIN is associated with both 10 sq ft and 36 sq ft package variants across retailer records. The correct choice therefore depends on coverage needs and the exact SGM version selected, not an invented noise-reduction percentage.
SPD’s decision rule: Use sheet area, clearance and a verified seller pack. An 80-mil product may occupy more installation space, but a thickness number alone does not establish greater vibration-damping performance in a given vehicle. Neither brand has been compared by us in a controlled same-car test.
Disclosure: As an Amazon Associate I earn from qualifying purchases. Sponsored product links may earn a commission at no additional cost to the reader.
Amazon Basics: ten pieces, approximately 10 sq ft

The original Amazon Basics destination, ASIN B07XMF2V77, is a butyl-rubber-based self-adhesive automotive damping mat with aluminum-facing material. It comes in ten sheets, each listed as 14.5 by 10 inches. Its available specifications and package name normally round the area to 10 square feet. The individual material sections can be cut to access interior surfaces, including suitably prepared door, floor and trunk panels.
Arithmetic check: 10 × 14.5 × 10 ÷ 144 = 10.07 sq ft of sheet face before cutting losses. Some old SPD material incorrectly described this pack as 7.2 sq ft; the published Amazon Basics source review has been corrected to reflect the sheet dimensions. Do not reduce this original ten-sheet product to 7.2 sq ft in a comparison table.
The source product record can be checked at an ASIN-associated product listing. The preserved commercial link is Amazon Basics ten-piece sound-deadening mat. We have not verified live price, delivery availability or stock on that link.
SGM Black: 80 mil material, with a 10/36-sq-ft ambiguity

SGM’s official website specifies an 80-mil (about 2-mm) butyl-mastic layer with aluminum foil and a self-adhesive format. Its 10-sq-ft model SGMBLK8010 consists of ten sheets about 14.7 × 9.8 inches each, while its 36-sq-ft model SGMBLK8036 consists of thirty-four pieces about 15.7 × 9.8 inches. These are distinct packs even though they share a brand, color and nominal thickness.
The original comparison affiliate key B09HPWP53S is found in regional retailer records describing both models. For example, one ASIN-associated seller page identifies the 10-sq-ft selection, while another identifies the 36-sq-ft model. Those conflicting descriptions cannot be resolved merely from the saved affiliate route.
See the original SGM Black product review for the product-family details. The original commercial destination remains SGM Black 80-mil mat; confirm whether the selected marketplace offer is SGMBLK8010 or SGMBLK8036, rather than assuming a 36-sq-ft pack.
Side-by-side specifications
| Buying factor | Amazon Basics | SGM Black |
|---|---|---|
| Original ASIN | B07XMF2V77 | B09HPWP53S |
| Product type | Self-adhesive butyl-rubber-based damping mat, foil faced | Self-adhesive butyl-mastic damping mat, foil faced |
| Advertised nominal thickness | Check the selected original mat specification | 80 mil / about 2 mm |
| Verified listed sheet count | 10 sheets | 10 or 34 depending on distinct SGM pack |
| Calculated/seller-marketed nominal area | 10.07 sq ft geometrically; marketed 10 sq ft | Manufacturer markets 10 or 36 sq ft |
| Exact live marketplace SGM variant | Not applicable | Not independently established |
| Independent controlled reduction measurement | Not established | Not established |
For SGM’s smaller published model, 10 × 14.7 × 9.8 ÷ 144 ≈ 10.00 sq ft; for the larger model, 34 × 15.7 × 9.8 ÷ 144 ≈ 36.32 sq ft. Those are nominal material faces, not proof of either package being delivered through this specific affiliate link. If the selected SGM package is 10 sq ft, nominal coverage is similar to Amazon Basics. If it is 36 sq ft, its marketed area is about 3.6 times larger; the acoustic benefit is not 3.6 times greater.
What these mats can and cannot do
Automotive damping mat treats vibration of resonant body panels. It can be useful when a metal door skin, floor pan or trunk panel rings or rattles, provided the material is applied appropriately. It does not replace weather stripping, seal exterior noise leaks, prevent all tire noise or work like room acoustic foam. A seller claim of complete soundproofing or an unqualified percentage reduction should not be relied on as a measured result.
Before purchase, measure the accessible sheet-metal surface, check sheet format and allow for trimming. During installation, clean and dry the surface, work around door drainage openings, moving window mechanisms, wiring, service holes, seat-belt or airbag components and clips. Confirm thermal limits before using a product near heat-exposed panels; automotive dampers are not automatically safe direct exhaust shields.
When each option makes sense
Amazon Basics fits best when you want a clearly identified ten-sheet starter pack, expect to treat about 10 sq ft of selected panels and can work within its specified material format.
SGM Black can fit when you specifically want its published 80-mil butyl-and-foil material and the chosen retailer identifies the exact 10-sq-ft or 36-sq-ft option. The wider family offers different purchase volumes, but the existing ASIN cannot be used to certify which is selected in checkout.
Neither is a complete soundproofing solution if the actual problem originates from a failed seal, leaking trim opening, a worn mechanical component or an untreated route that sheet-metal damping does not address.
Frequently asked questions
Is the Amazon Basics coverage 7.2 or 10 sq ft?
For the ten 14.5 × 10-inch pieces listed against the original ASIN, the geometry is about 10.07 sq ft. The marketed package rounds to 10 sq ft. An old 7.2-sq-ft figure was inconsistent with those dimensions.
Does 80 mil guarantee a quieter car?
No. Mil describes thickness, while damping performance depends on the specific compound, constraint layer, panel, installation and comparison method. No same-vehicle controlled result is verified here.
Can I assume SGM ships 36 sq ft?
No. Manufacturer models SGMBLK8010 and SGMBLK8036 are distinct and both appear in original-ASIN-associated reseller results. Check the seller’s current selected variant.
Do these mats replace foam, MLV or door seals?
No. Metal-panel damping, airborne-sound barriers, absorbers and gap sealing address different parts of a noise problem.
Source scope and final recommendation
Specifications come from original-ASIN-associated seller records, SGM’s two manufacturer pack pages and the related published SPD product reviews. The same two original Amazon affiliate routes, their tracking ID, the source review URLs and the original article permalink are preserved. No independent installation tests, live stock, checkout or predicted decibel benefits are claimed.
SPD recommends choosing the material by verified size and installation fit. If you only need a 10-sq-ft starter kit, the Amazon Basics pack offers straightforward sheet geometry. If you want SGM Black, confirm whether the original offer is 10 or 36 sq ft before comparing cost and project coverage.
Good luck and happy soundproofing!