Table of Contents
Overview
Audimute Peacemaker Sound Barrier uses a 3 mm recycled rubber layer for walls, ceilings, and floors. Also, its dense construction is intended to reduce sound transmission within residential, commercial, and studio assemblies.
The barrier is designed to block airborne sound between walls, floors, and ceilings. However, it supports sound reduction rather than complete elimination of external noise. It belongs between rigid structural surfaces, where added mass and reduced air flow form part of the sound control approach.
Key takeaways
- The material contains approximately 90% post-consumer recycled content, primarily recycled tire rubber.
- The standard roll measures 2 feet by 25 feet and covers 50 square feet.
- The 3 mm layer is designed for wall, ceiling, floor, drywall, and subfloor assemblies.
- Its flexible construction conforms to alcoves, short walls, and surfaces with fixed features.
- The material increases mass and reduces air flow when installed between rigid layers.
- Its weight may require mechanical fastening or structural support during vertical or overhead installation.
What the product is designed to do
This 3 mm sound barrier uses a dense rubber-based layer to manage airborne sound transmission. Also, it is intended for homes, offices, recording studios, apartments, restaurants, and similar environments.
The sound control principle centers on added mass within a structural assembly. In addition, reduced air flow supports the barrier function when the material sits between solid surfaces.
The construction can also form a constrained-layer system. Here, the elastic middle layer sits between denser surfaces as part of the sound control approach.
Materials, dimensions, and technical details
The barrier uses processed rubber granules bonded with a polymer binding agent. Also, it contains approximately 90% post-consumer recycled material and is manufactured in the USA.
| Detail | Specification |
|---|---|
| Material | Processed rubber granules with a polymer binding agent |
| Recycled content | Approximately 90% post-consumer recycled material |
| Thickness | 3 mm |
| Standard roll size | 2 feet by 25 feet |
| Coverage | 50 square feet |
| Approximate weight | 33 pounds |
| Additional format | 4 feet by 25 feet |
| Manufacturing | Made in the USA |
The material is water resistant and chemically neutral. It also resists numerous diluted acids and alkaline solutions.
Its construction is non-toxic and non-carcinogenic. In addition, the recycled content may support LEED credits under Recycled Content and Indoor Environmental Quality categories.
Installation and placement notes
The barrier is designed for placement between two rigid layers. For example, it can sit between drywall surfaces or between subfloors in a flooring system.
It supports both new construction and retrofit applications. Next, the installer can cut and position the flexible material around alcoves, short walls, and fixed features.
The roll weighs approximately 33 pounds in the 2-foot by 25-foot format. As a result, vertical or overhead placement may require mechanical fastening or structural support.
A flexible recycled rubber barrier can conform to irregularly shaped areas. However, careful handling remains important because of the material weight.
The material also supports outdoor use. Its water resistance and chemical neutrality fit the stated range of structural applications.
Performance characteristics described
The barrier is intended to reduce airborne sound transmission through walls, floors, and ceilings. Also, it works through added mass, reduced air flow, density, and elasticity within the assembly.
This is a barrier function rather than an absorption function. The product text focuses on blocking transmitted sound within structural layers, not treating sound reflections inside a room.
The dense sound control layer belongs between solid surfaces. In addition, the constrained-layer approach uses the elasticity of the middle layer as part of the assembly.
Readers researching broader soundproofing material principles can place this barrier within a mass-based sound control approach. The specific application still centers on walls, ceilings, floors, drywall, and subfloors.
Review patterns buyers commonly mention
Buyers commonly report noticeable reductions in transmitted noise after installation on drywall or within structural assemblies. However, feedback also reflects reduced sound levels rather than complete elimination of outside noise.
Handling appears as another repeated theme. The material feels heavy, so installation may require careful positioning and support.
Some feedback also refers to a characteristic rubber smell when the material remains exposed. In addition, the odor tends to lessen over time and stays undetected when enclosed within walls, floors, or ceilings.
Pros
- Uses approximately 90% post-consumer recycled material.
- Supports walls, floors, ceilings, drywall, and subfloor assemblies.
- Conforms to irregular surfaces and fixed structural features.
- Resists water, diluted acids, and alkaline solutions.
- Supports new construction, retrofit work, and outdoor use.
Cons
- The material weight may complicate vertical or overhead installation.
- Exposed material may produce a low-level rubber odor in limited ventilation.
- The barrier supports noise reduction rather than complete sound elimination.
FAQ
What type of noise is this barrier intended to address?
It is intended to reduce airborne sound transmission between walls, floors, and ceilings. Also, the material uses added mass and reduced air flow within the assembly.
Where should the material sit in a wall?
It is designed for installation between two rigid layers, such as drywall surfaces. The 3 mm recycled rubber layer functions as the flexible middle layer.
Can it be used beneath flooring?
Yes. It supports placement between subfloors in flooring systems and forms part of a layered floor assembly.
Can the material fit around irregular areas?
The flexible construction conforms to alcoves, short walls, and surfaces with fixed features. Also, it can be cut and positioned during installation.
Does the rubber material have an odor?
Exposed material may carry a characteristic rubber smell, especially with limited ventilation. However, the odor lessens over time and stays undetected when enclosed within structural layers.
How large is the standard roll?
The standard roll measures 2 feet by 25 feet and covers 50 square feet. It weighs approximately 33 pounds and uses a nominal thickness of 3 mm.