Affiliate disclosure: This article contains affiliate links. We may earn a commission if you purchase through them, at no additional cost to you.
Quick verdict: coverage and source certainty matter more than marketing
FatMat RattleTrap 80-mil and Siless Black 80-mil are both marketed for damping vibrations in vehicle panels. The original linked FatMat product is advertised as a 50 sq ft kit with a logo and installation accessories; the Siless Black product is marketed as a 36 sq ft package. Those are not equivalent package sizes, but both are nominally 80-mil materials. No matched acoustic test for these exact offers has been verified here.
SPD’s approach: Determine the actual accessible area you plan to treat, confirm the chosen retailer’s pack and material, then compare costs and installation requirements. A large pack is not automatically quieter per square foot. Also, “RattleTrap” is used across distinct FatMat material lines: do not assume every similarly named historic product is the new butyl version.
Disclosure: As an Amazon Associate I earn from qualifying purchases. Sponsored product links may earn a commission without changing your price.
FatMat RattleTrap: 80-mil, 50 sq ft seller-described package

The existing FatMat RattleTrap 80-mil review describes a 50 sq ft package with printed logo and a tool kit. FatMat’s official RattleTrap range includes both logo and no-logo packages. The manufacturer also lists new RattleTrap butyl 80-mil products, separate from its older rubberized RattleTrap formulation. We therefore cannot establish the original linked ASIN’s exact chemistry or generation merely from a family name.
For a 50 sq ft size, a manufacturer-listed RattleTrap roll configuration is approximately 18 inches wide and 33.5 feet long, a marketed total of 50 sq ft. The calculation (18/12) × 33.5 = 50.25 sq ft is a nominal geometry calculation for that manufacturer configuration, not independent confirmation of the exact logo-kit version shipped through this affiliate offer. The manufacturer lists an installation roller and cutting knife with some kit configurations; confirm actual inclusions at checkout.
Other retailers list 80-mil FatMat “with logo” kits, but similar names can include different material generations, package sizes and logos. The original sponsored destination remains the saved FatMat product route. Check the chosen package description against your intended material before purchasing, especially whether it is butyl or rubberized formulation.
Siless Black: 80-mil, 36 sq ft package

Siless’s own product page advertises its Black 80-mil/2-mm BmastiC damping material as a self-adhesive, peel-and-place automotive mat covering 36 sq ft. Product listings tied to the original ASIN B07CG2YPRJ identify manufacturer part NEWSLB_36 and a 36 sq ft package. Manufacturer claims about outperforming competing products should not be mistaken for an independent matched-car test.
The relevant source review, Siless Black 80 mil 36 sq ft, currently carries an incorrect featured image: its media file is catalogued as an unrelated Mindsoft garage curtain. That old image has been intentionally excluded from this comparison, but the separate source-review defect has not been fixed. The original tagged Siless destination is preserved without an alternate SKU substitution.
FatMat versus Siless: decision table
| Factor | FatMat RattleTrap linked offer | Siless Black linked offer |
|---|---|---|
| Original ASIN | B0DDVRJ48V | B07CG2YPRJ |
| Advertised area | 50 sq ft | 36 sq ft |
| Advertised nominal thickness | 80 mil | 80 mil (about 2 mm) |
| Material identity | Original variant/generation requires confirmation; FatMat markets distinct rubberized and butyl RattleTrap lines | Siless manufacturer describes BmastiC damping formula; some retailers label as rubber/butyl |
| Packaging | Seller-marketed with-logo 50 sq ft kit; verify accessories and roll format | Seller-marketed 36 sq ft mat pack; instructions supplied, roller not guaranteed |
| Comparable measured road-noise difference | Not established | Not established |
| Best shopping reason | Larger planned treatment area if exact product matches the required formula | Smaller 36 sq ft purchase with stronger first-party product description |
Nominal area comparison: 50 ÷ 36 = approximately 1.39. FatMat’s advertised package offers about 39% more nominal area than the 36 sq ft Siless package, assuming both original retailer variants actually match their stated coverage. This is not a 39% improvement in noise reduction, attenuation or performance.
What damping materials can and cannot solve
When applied correctly, constrained-layer damping material can reduce resonance of suitable sheet-metal panels. It does not make a vehicle airtight and cannot eliminate every route for air, wind, exhaust, tire or structural noise. An 80-mil number expresses nominal thickness, not a noise-reduction guarantee. Adhesive, substrate, foil constraint and temperature exposure also matter, and the two products have not been compared in a controlled same-vehicle test here.
Start by measuring your actual door skins, floor or trunk surfaces rather than the visible outline of trim panels. Clean and dry the intended substrate before application; use an appropriate roller if recommended. Preserve door drainage holes, window tracks, wiring, fasteners, restraint components and access panels. Do not treat general automotive damping mats as automatically suitable for direct exhaust, catalytic-converter or other extreme heat exposure without a product-specific manufacturer rating.
How to choose
Consider the saved FatMat offer if your measured project needs more than 36 sq ft and you can positively verify that the exact 50 sq ft offer is the preferred material generation, logo configuration and accessories. Treat any unmatched retail claims about dB improvement as advertising, not demonstrated results.
Consider Siless Black if 36 sq ft meets your installation requirement and you prioritize its clearer documented 80-mil package designation. The source-linked ASIN matches the published Siless Black 36 sq ft product family; the separate source review’s incorrect photo is not a reason to assume the material specifications themselves refer to a garage curtain.
Choose neither as a sole remedy if your dominant noise comes through a leaking door seal, cabin opening or an untreated transmission path. These damping sheets do different work from porous acoustic foam, MLV mass barriers and weather seals.
Frequently asked questions
Is FatMat 50 sq ft automatically a better deal?
Not without current price, exact chemistry, usable coverage, accessories and freight. It is a larger nominal package but not inherently better damping.
Are both exactly the same 80-mil product?
No. They share an advertised thickness, not a proven formulation. FatMat has multiple similarly named lines and Siless uses its own compound description.
Does either one block all road noise?
No. Damping resonant panels addresses one mechanism; road-noise paths and cabin openings can remain.
Why isn’t the Siless source-review photo used here?
That source media is incorrectly identified as an unrelated garage-curtain product in WordPress. We have used a relevant Siless archive asset in this comparison and recorded the parent photo issue separately.
Evidence and final recommendation
The manufacturer’s material family and 50 sq ft configuration have been distinguished from the original specific FatMat ASIN’s unresolved generation. Siless’s current manufacturer description and original exact-ASIN retailer listing corroborate the marketed 36 sq ft 80-mil model. No hands-on decibel test, retail stock status, variant delivery confirmation or checkout result is asserted. Both original tracked Amazon destinations are preserved.
SPD’s choice begins with required area and exact-material identity. A verified 50 sq ft FatMat kit may suit a larger job; a verified 36 sq ft Siless package may suit a smaller one. Neither should be chosen from unproven noise-reduction percentages alone.
Good luck and happy soundproofing!