Quick verdict: The historical Frienda B0G6KYL56L product is a small, marketed “mass-loaded vinyl” sound-barrier roll, while AcoustiBlok Blok16 / Blok32 are manufacturer-defined building membranes supplied in much larger rolls. The key warning is that Frienda’s indexed product record identifies its material as rubber and gives conflicting coverage information. Do not assume it is a conventional vinyl formulation or use the advertised square footage without verifying the actual roll.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. This guide preserves the original tracked Frienda product link but does not claim that the current seller, stock, measurements or checkout configuration have been independently verified. AcoustiBlok’s manufacturer references are informational, not substitute affiliate purchases.
Which Exact Products Are Being Compared?
The original Frienda affiliate destination identifies ASIN B0G6KYL56L. An ASIN-associated retailer record identifies manufacturer model MEN-Frienda-2191, advertises nominal 2-mm thickness, lists the material as rubber and supplies a 21-sq-ft coverage field. The product’s “1.33 × 13 ft” marketed dimensions would instead calculate as 17.29 sq ft (1.33 × 13). Its separate 16.34 × 4.72-inch dimensions appear in a different structured field and should not be treated as the usable unrolled sheet without proof. The source does not resolve these contradictions.
AcoustiBlok has clearly defined Blok16 (1 lb/sq ft, nominal 1/8 inch) and Blok32 (2 lb/sq ft, nominal 1/4 inch). They are not simply other packaging sizes of Frienda. The manufacturer documents construction-grade viscoelastic polymer membranes, in standard 54-inch-wide by 30-foot-long rolls; do not assume that its assembly tests or listed fire properties extend to the Frienda product.
Frienda: Small Roll With Material and Area Caveats

The Frienda roll is presented for acoustic barrier applications in homes and other spaces. However, the seller’s indexed “rubber” material identification conflicts with “mass-loaded vinyl” in the marketed title. These labels alone are insufficient to certify chemical composition, surface mass, fire classification, durability or an ASTM-tested sound-transmission value. Its apparent 2-mm thickness does not, by itself, verify the 1-lb/sq-ft figure repeated in older articles.
For a small repair, the nominal format may be convenient to cut, but purchase planning must begin with the actual dimensions printed on the selected product and the construction to which it will be attached. If choosing the original linked model, open the Frienda original-ASIN product page and confirm dimensions, gross coverage, material safety information and applicable return terms. We have not verified an independent product acoustic test.
AcoustiBlok: Defined Surface Mass for Construction

AcoustiBlok’s manufacturer specification identifies a barium-free viscoelastic polymer membrane containing recycled plastics and mineral fillers. Its Blok16 is nominally 1/8 inch thick at 1 lb/sq ft; Blok32 is nominally 1/4 inch at 2 lb/sq ft. Both are described as 54-inch × 30-foot standard rolls, or 135 sq ft of nominal area. These materials are normally installed as part of a wall, floor, ceiling or similar construction, with project-specific assembly and handling details.
The brand publishes STC 26 for Blok16 and 32 for Blok32, but such values must be read alongside the actual test method/specimen. A membrane’s headline rating is not a promise of that number for a homeowner’s entire wall. Verify the chosen grade’s fire classification and the exact approved construction rather than assuming that the product’s UL classification approves every configuration. Our AcoustiBlok guide provides the broader material discussion.
At-a-Glance Comparison
| Factor | Frienda B0G6KYL56L | AcoustiBlok Blok16 / Blok32 |
|---|---|---|
| Entity identification | Retailer-indexed MEN-Frienda-2191 model | Two manufacturer-defined membrane grades |
| Product material | Marketed as MLV; indexed record says rubber; chemistry unverified | Viscoelastic polymer with recycled plastics and minerals (maker) |
| Nominal thickness | 2 mm stated by seller | Blok16 1/8 in; Blok32 1/4 in |
| Published surface weight | 1 lb/sq ft in historical article; independently unverified | 1 or 2 lb/sq ft manufacturer-defined |
| Nominal coverage | “1.33 × 13 ft” implies 17.29 sq ft, but seller lists 21; conflict | 54 in × 30 ft = 135 sq ft per standard roll |
| Acoustic test evidence | Exact original-ASIN independent result not confirmed | Maker STC 26/32 claims; assembly context required |
| Original commercial route | Original saved Frienda Amazon ASIN link | No verified original product-specific affiliate link in this article |
Evidence boundary: Frienda’s contradictory listing fields cannot be reconciled by choosing whichever number is convenient. AcoustiBlok product and assembly figures also require correct construction context. These are source-linked specifications, not a head-to-head sound test.
Which Should You Choose?
For a specified new wall or ceiling assembly: AcoustiBlok’s defined grades provide a clearer starting point because surface weight and roll size are maker-defined. The installer still needs structural load, sealing, fastener, fire and acoustic assembly information. A heavy flexible roll requires safe lifting and appropriate fastening.
For a small experimental barrier area: Frienda’s listed product is a smaller format, but verify the selected SKU, material composition, product-label dimensions and safety requirements before making a cut list. A loosely hung or poorly sealed patch should not be assumed to stop structure-borne or flanking noise.
For either: flexible mass barriers may contribute to airborne sound isolation as part of complete constructions. They are not porous absorption panels and will not remedy an untreated door gap, window leak or flanking path on their own. Do not substitute manufacturer grades when the original linked product is different.
Frequently Asked Questions
Does Frienda B0G6KYL56L definitely contain vinyl?
No. The indexed product title says “mass-loaded vinyl,” but its structured material field says rubber. This composition conflict is unresolved, so the precise material should be verified with the manufacturer or product documentation.
Is Frienda 17.29 or 21 square feet?
Those are conflicting source fields. The marketed 1.33 × 13 ft rectangle is mathematically 17.29 sq ft; the indexed seller lists 21 sq ft. Neither figure should replace the actual measured sheet until the variant is confirmed.
Would Blok32 outperform Frienda in a finished wall?
No reliable quantitative answer is available from these mismatched sources. AcoustiBlok’s published STC figure does not establish a direct comparison against an untested Frienda specimen in an identical assembly.
SPD’s Recommendation
We would use a manufacturer-defined AcoustiBlok grade for a serious architectural specification, then request the tested assembly documentation. We would consider Frienda MEN-Frienda-2191 / B0G6KYL56L only after confirming what material and roll coverage are actually delivered. You may inspect the unchanged original Frienda product link and the SPD standalone Frienda review for context, but that is not proof of today’s merchant stock or product chemistry.
Good luck and happy soundproofing!