As an Amazon Associate I earn from qualifying purchases.
Quick assessment: The HEMOTON six-pack consists of thin white polyester-fiber wall panels according to its listing. They may be useful as limited-area room treatment, but “noise cancelling” and “soundproofing” are not supported by product-specific test results in the material we reviewed. We have not conducted a hands-on test.
Affiliate disclosure: The HEMOTON product listing may earn this site a commission if you purchase through it.
The important number is 0.9 cm
The seller describes each panel as approximately 30 × 30 × 0.9 cm (11.81 × 11.81 × 0.35 in). Six square faces at that size total about 0.54 m², or 5.8 ft², before any gaps or cutting. It is a small decorative treatment area, not enough information to predict a room-wide acoustic change.
The 0.9 cm depth also matters: thin materials should not be assumed to provide meaningful bass absorption. Actual results depend on material properties, mounting and the problem frequency, which the listing does not document with a verified coefficient table.
Which claims are established?
| Listing detail | Our reading |
|---|---|
| Six panels, white color | Descriptive product information; confirm current variant |
| Polyester-fiber construction | Listed material, with no independent composition check |
| 30 × 30 × 0.9 cm each | Nominal dimensions, not an acoustic rating |
| “Noise cancelling” or “soundproofing” | No verified sound-transmission or active noise-control data |
| General studio or home-theater use | Possible placement context, not a proven performance outcome |
Would six panels keep television sound from leaving?
No evidence shows they would. Auralex distinguishes sound absorption from sound isolation: absorbing internal reflections is different from preventing sound transmission through walls and doors. The HEMOTON panels should not be presented as a wall sound barrier.
Product identity and evidence gaps
The original article links to Amazon identifier B0F48TPCWM. We could not independently reconcile that ASIN with a current HEMOTON manufacturer specification sheet for this exact six-panel model. The panel count, approximately 30 × 30 × 0.9 cm dimensions and white polyester description are therefore historical seller-reported details, not a locked verified manufacturing configuration. Confirm the live seller’s model, color, dimensions, adhesive inclusion and return terms before buying.
General online listings for six white polyester-fiber panels cannot authenticate this specific ASIN. Nor does seeing a photograph of wall panels establish laboratory NRC, STC or fire-resistance ratings. For acoustic performance comparisons, an identified test sample and how it was installed are essential.

Where 5.8 square feet could make a difference
If a compact recording desk is next to a reflective bare wall, targeted thin absorbers may reduce some higher-frequency reflections. The six panels would cover only about 5.8 sq ft in their advertised configuration. Position them where reflections matter to the microphone or listener, not as an arbitrary decorative strip on a distant wall. If the goal is broad reverberation reduction across a large room, the small face area and 0.9 cm depth are significant limitations.
For a controlled listening check, record the same voice phrase with identical microphone settings before and after temporary, safe placement. Note a change in echo or tonal coloration, not a claim of room decibels blocked. This practical check is qualitative; it cannot replace independently measured frequency-band absorption coefficients.
Safer reasons to choose another treatment
Choose a thicker, tested broadband absorber where low-mid-frequency control matters. Investigate door seals or a full partition assembly when privacy between rooms is the aim. For rental walls, confirm how mounting will affect paint and whether removable adhesive is actually included. Check required fire classification before fitting unknown material in studios, schools or public venues. Our acoustic wall-treatment guide explains the relationship between panel placement, depth and the problem frequency.
A small-room experiment that makes sense
If a desk or recording corner has obvious harsh reflections, try positioning a small group where sound hits a nearby bare wall. Record an identical voice sample with the same microphone placement before and after temporary positioning. Listen for changes in reflected sound rather than relying on the seller’s room-noise claims. Results may be subtle.
Before permanent mounting, check how the panels attach, whether they mark paint, and whether the seller supplies applicable fire-test documents. Do not extrapolate performance or safety from the words “polyester fiber.”
Bottom line for buyers
Consider this a compact, thin polyester decorative panel set with unverified acoustic performance. If you need dependable control of reverberation, compare thicker panels with published test data. If you need quieter neighbours or traffic isolation, investigate the separating construction and leakage paths instead.
Good luck and happy soundproofing!