Table of Contents
Overview
KILMAT 80 mil 36 sqft Car Sound Deadening Mat uses self-adhesive automotive butyl with an aluminum foil layer. It supports noise reduction and vibration control across interior vehicle surfaces.
The material is designed to reduce vehicle noise and minimize resonance within metal panels. Also, it supports vibration dampening in doors, floors, trunks, and other metal areas. Its purpose focuses on automotive noise control rather than every sound path inside a vehicle.
Key takeaways
- The 80 mil automotive sound deadening mat covers 36 square feet.
- Its construction combines a self-adhesive butyl layer with aluminum foil.
- Each sheet measures 15.7 inches by 9.8 inches for measured cutting and placement.
- An embossed foil pattern helps confirm sufficient rolling during installation.
- The material supports automotive noise reduction, vibration control, and reduced metal-panel resonance.
- Installation requires clean, degreased surfaces, a roller, gloves, and a well-ventilated work area.
What the product is designed to do
This material functions as a vibration-damping layer for automotive metal panels. Also, the butyl layer adheres directly to prepared interior surfaces.
Damping addresses vibration within a panel rather than absorbing sound like soft insulation. For example, doors, floors, and trunks contain metal sections that may resonate during vehicle operation.
The mat is intended to reduce vehicle noise and minimize resonance in those panels. In addition, the material supports improved sound quality when installed in automotive interior areas.
The butyl and foil vibration-damping material comes in separate sheets. This format supports cutting and positioning across curved or irregular surfaces.
Materials, dimensions, and technical details
The construction uses automotive self-adhesive butyl and an aluminum foil layer. Also, the aluminum backing carries an embossed installation pattern.
| Detail | Specification |
|---|---|
| Material | Automotive butyl with aluminum foil |
| Thickness | 80 mil |
| Total coverage | 36 square feet |
| Sheet dimensions | 15.7 inches by 9.8 inches |
| Weight | 0.5 pounds per square foot |
| Part number | KLM8036 |
| Global Trade Identification Number | 00857195006153 |
The foil and butyl construction forms a self-adhesive automotive insulation layer. In addition, the 36-square-foot quantity supports measured application across several interior sections.
Installation and placement notes
Installation begins with a clean and degreased metal surface. Next, each sheet can be cut and positioned over the intended area.
The adhesive is very sticky, so careful alignment helps during placement. However, repeated buyer feedback includes some repositioning while setting the material in place.
A roller presses the embossed aluminum foil surface against the panel. The embossed pattern should become smooth and flat after sufficient rolling.
This visual change helps verify contact between the adhesive layer and the vehicle surface. Also, firm rolling supports adhesion across edges, curves, and irregular sections.
Gloves protect hands from sharp foil edges during cutting and pressing. In addition, installation guidance advises working in a well-ventilated area while preparing metal surfaces.
Performance characteristics described
The material supports automotive noise reduction and vibration dampening. Also, it is intended to minimize resonance within vehicle metal panels.
Road noise reduction appears in repeated feedback from installations in doors, floors, and trunks. In addition, vibration control and improved sound quality occur as recurring patterns.
The 80 mil thickness forms the specified damping configuration. However, performance still depends on surface preparation, placement, cutting, and thorough rolling.
This mat works through direct contact with vibrating automotive panels. As a result, it belongs on interior metal surfaces where damping and resonance control are the intended goals.
The 36-square-foot automotive insulation kit supports coverage across multiple vehicle areas. Its sheet format also supports shaping around curved sections.
Review patterns buyers commonly mention
Buyers commonly report reduced road noise after placement in doors, floors, and trunk areas. Also, vibration control appears repeatedly in feedback involving automotive metal panels.
Ease of cutting, positioning, and installation forms another recurring pattern. In addition, strong adhesion appears often, with the adhesive characterized as aggressive during handling.
Some users report repositioning the sheets during initial placement. However, adhesive residue on tools or nearby surfaces appears as a recurring installation concern.
Pros
- Uses an 80 mil butyl and aluminum construction.
- Covers 36 square feet with separate cut-to-fit sheets.
- Includes a self-adhesive backing for direct panel application.
- Features an embossed foil pattern for rolling verification.
- Supports noise reduction, vibration control, and reduced metal resonance.
Cons
- Sharp foil edges require gloves during handling and installation.
- The strong adhesive may leave residue on tools or surrounding surfaces.
- Installation requires surface cleaning, degreasing, cutting, positioning, and rolling.
FAQ
What type of noise control does this mat support?
It supports automotive noise reduction and vibration dampening. Also, it is intended to minimize resonance within metal vehicle panels.
Where can the sheets be installed?
The sheets support placement across doors, floors, trunks, and other interior metal panels. They can also be shaped around curved or irregular surfaces.
How do you confirm that a sheet has been rolled correctly?
The aluminum foil uses an embossed pattern as an installation indicator. After sufficient rolling, the pattern becomes smooth and flat.
Does the material use a separate adhesive?
The automotive butyl layer is self-adhesive. Installation still requires a clean and degreased surface for proper placement.
What tools and protective items support installation?
A roller supports pressing and smoothing across the foil surface. Also, gloves protect hands from sharp foil edges during cutting and handling.