Noico Black 80 Mil vs Siless Black 50 Mil: Area or Thickness?

Quick comparison: The Noico Black DMM1 80-mil kit provides 36 sq ft across nine larger fold-cut butyl-and-foil sheets. The original Siless Black affiliate ASIN B07B794KNH is supported as NewSLS50_52, a 50-mil (about 1.3-mm), 52-sq-ft Bmastic automotive vibration-damping kit. Noico provides thicker nominal material per square foot; Siless offers greater coverage in this specific source-associated pack. Neither can be declared the overall stronger in-car noise blocker without a matched test and price per usable treated area.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. The original sponsored Siless link ASIN B07B794KNH remains unchanged. There was no original Noico product-specific affiliate route on this comparison, so the manufacturer is referenced directly rather than inventing a second ASIN. Current Amazon-selected package, stock and seller variations have not been inspected.

Noico Black DMM1: nine larger 80-mil pieces

Historical Noico Black 80 mil vehicle damping material source photo, not a current DMM1 package count verification
SPD Noico Black source photo; exact DMM1 dimensions come from Noico’s maker page.

Noico’s official DMM1 specification lists nominal 80 mil / 2 mm butyl-and-foil construction; nine folded 29.5 × 19.5-inch pieces; and 36 sq ft of supplied material. Published material mass is around 0.7 lb per sq ft. Its embossed foil is intended to make full pressure rolling easier to assess during installation. These are vendor specifications, not a guaranteed percentage noise reduction in every vehicle.

This format suits broad vehicle floor or trunk metal where larger sections may mean fewer overlaps. Cutting around wiring, door-brace shapes and access covers still requires careful trimming. Noico’s different 150-mil foam liners are separate products and must not be conflated with this DMM1 butyl mat.

Siless Black B07B794KNH: thinner 52-sq-ft Bmastic kit

Siless Black 50 mil 52 sq ft automotive self-adhesive mat source product image
Existing SPD Siless Black 50-mil source image. Confirm delivered colour, roll or sheet format and actual pack at checkout.

The original Siless tracked ASIN B07B794KNH is linked in ASIN-specific indexed data to NewSLS50_52, described as 50 mil, 52 sq ft with Siless’ Bmastic composition. The maker’s catalogue lists a Black 50-mil 52-sq-ft version alongside materially different 80-mil kits. The latter should not replace this original comparison destination.

Retailer records supply approximate individual dimensions of 23.6 × 15.94 inches but do not independently establish that the currently selected package supplies a fixed number of identical sheets, or that a specific acoustic decrease will be achieved. Some sellers even describe the base material differently; treat claims of a specific polymer formula as seller descriptions until a matching manufacturer technical sheet is available.

Side-by-side decision

Factor Noico Black DMM1 Siless Black NewSLS50_52
Commercial reference Manufacturer model DMM1; no original tagged Noico route Original tracked ASIN B07B794KNH
Nominal thickness 80 mil / 2 mm 50 mil / ~1.3 mm
Advertised total area 36 sq ft 52 sq ft
Pack description 9 folded pieces, 29.5 × 19.5 in Indexed 52-sq-ft Bmastic pack; current selected count unverified
Material role Adhesive butyl/foil panel damping Adhesive mastic panel damping
Installed acoustic test on same car Not provided Not provided

How to select for the vehicle

Measure the treated metal: choose an area and plan access around door drains, window tracks, safety sensors, electrical equipment, seat-belt anchors and airbags. Larger nominal coverage does not imply more useful installed area if much of the sheet is cut away. Choose an appropriate thickness and sheet size for the specific body panel’s resonance and remaining trim clearance.

Prepare and roll properly: installation requires clean, dry, properly prepared metal and firm pressure, with the maker’s temperature and safety limits observed. Neither product should be placed on exposed exhaust components, used to block drain holes or treated as a replacement for an airtight sound-isolation assembly.

Do not infer acoustic superiority from thickness alone: material damping depends on composition, temperature, thickness, bonded surface and vehicle design. There is no direct matched vehicle test here. Decide after comparing the current exact seller pack, final installed cost and return policy, rather than relying on marketing statements about total dB reduced.

Verdict: Noico is a reasonable source-backed 80-mil shortlist for targeted higher-thickness panel damping, while Siless’ original 50-mil ASIN offers nominally more coverage for a different thickness and material system. For the original deeper Noico source review and Siless source review, check the listed model and your actual installation area before purchase.

Good luck and happy soundproofing!