Kilmat 80 Mil vs Siless Black 50 Mil: 36 vs 52 Sq Ft

Quick verdict: Kilmat’s documented 80-mil KLM8036 kit provides 36 sq ft in 34 smaller butyl-and-foil sheets. The original Siless Black 50-mil NewSLS50_52 listing describes 52 sq ft in 20 larger sheets. Kilmat is the thicker of these two specified kits; Siless supplies more nominal coverage per pack. Neither fact proves that one produces a quieter car in a controlled head-to-head test.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Product links may earn a commission at no additional cost to you. Pricing, current seller, stock and the exact checkout configuration have not been independently confirmed.

What Is Being Compared?

This is a comparison of Kilmat 80 mil, 36 sq ft (KLM8036) with Siless Black 50 mil, 52 sq ft (NewSLS50_52; original ASIN B07B794KNH). It is not a verdict about every Kilmat thickness or every Siless product generation. Kilmat also sells 50-mil and other kits, but those are different purchase configurations and should not be silently substituted. Both materials are intended principally to damp vibration in vehicle sheet metal; neither should be confused with a complete mass-barrier, decoupled-floor or airborne-sound-isolation system.

Kilmat 80 Mil: A Smaller-Sheet Butyl Kit

Kilmat-branded illustration showing vehicle noise sources; this is not a photograph of the KLM8036 mat kit
Kilmat’s existing vehicle-noise illustration is conceptual, not a photo of the mats.

According to Kilmat’s KLM8036 product specification, this kit contains 34 butyl-and-foil sheets, each approximately 15.7 × 9.8 inches, for a marketed coverage of 36 sq ft. The nominal thickness is 80 mil (2 mm). Kilmat describes an embossed foil facing that flattens as the sheet is rolled firmly into place. The product’s role is to reduce metal-panel vibration and associated resonance; it is not an independent promise of a particular cabin decibel reduction.

For doors, wheel arches, floor sections or irregular interior metal surfaces, relatively compact sheets may make planning and cutting manageable. Kilmat’s 80-mil kit also has a smaller total nominal area than the Siless kit below, so compare your measured treatment area before selecting a box. For more background on the Kilmat family, see our Kilmat sound-deadening review.

Siless Black 50 Mil: More Area in Larger Pieces

Original Siless Black NewSLS50_52 50-mil automotive damping mat listing image; selected retail pack unverified
Source-associated Siless Black 50-mil image; verify the exact package on the retailer page.

The original Siless product identifier B07B794KNH is indexed by retailer records as model NewSLS50_52, a 50-mil (approximately 1.27-mm) self-adhesive automotive damping mat marketed as 52 sq ft in 20 sheets of approximately 23.6 × 15.94 inches. The indexed seller description calls its formulation “Bmastic”; that chemistry description is a seller claim, not an independently verified materials analysis. The product is intended for pressed-on metal-panel treatment, with cutting and rolling to suit the surface.

Siless’s original Amazon product link is retained without swapping the ASIN to a newer Siless variant. We have not independently verified the currently selected seller, package or purchase availability. The larger pieces and higher marketed area could suit broad surfaces, while smaller spaces might require more trimming.

Kilmat vs Siless: Specification Table

Decision factorKilmat KLM8036Siless NewSLS50_52
Original model or product keyKLM8036 (manufacturer-defined kit)NewSLS50_52; original ASIN B07B794KNH
Nominal thickness80 mil / about 2 mm50 mil / about 1.27 mm
Advertised package coverage36 sq ft52 sq ft
Pieces per specified pack34 sheets20 sheets
Approximate sheet dimensions15.7 × 9.8 in23.6 × 15.94 in
Material identificationButyl layer, foil facing (manufacturer)“Bmastic” formulation (indexed seller description)
ApplicationCut, adhere and roll onto clean metalCut, adhere and roll onto clean metal
Comparable independent in-vehicle testNot established for these two exact kits

Sources and limits: Kilmat’s official product sheet documents the KLM8036 figures. The original Siless ASIN/model and dimensional fields are independently indexed in ASIN-associated product records. Packaging, formulation and merchant availability can change. These figures are not the result of SPD laboratory testing.

Which Is a Better Fit for Your Vehicle?

Choose by the work area, not by the bigger thickness number alone. If you are treating complex door shapes, a box of smaller Kilmat sheets may be more convenient to cut and roll. If your plan covers more continuous floor or trunk metal, Siless’s listed 52 sq ft may reduce the number of boxes needed. Actual required coverage depends on your vehicle, where the resonant panels are, and how much material you need after trimming.

Before installing either product, clean and dry the metal, plan around trim fasteners, drainage holes, wiring and moving mechanisms, and roll the adhesive layer into full contact. Do not cover airbags, safety equipment, inspection access, drains or heat-sensitive components. Follow the product’s actual temperature and application guidance, particularly around engine- or exhaust-adjacent surfaces. Vibration mats are not substitutes for suitable thermal barriers or dedicated airborne-noise blocking treatments.

For another comparison involving the same original Siless 50-mil model, read Noico Black 80 Mil vs Siless Black 50 Mil.

Frequently Asked Questions

Does 80 mil automatically block more sound than 50 mil?

No. Thickness alone does not establish a controlled difference in vehicle cabin noise. Damping formulation, application, panel response and installation quality matter, and neither exact kit has a verified like-for-like cabin-noise test in this comparison.

Is the Siless kit the same area as Kilmat?

No. The cited original models are marketed as 52 sq ft for Siless and 36 sq ft for Kilmat. Check the actual product label and required cut allowance before buying.

Can either product replace mass-loaded vinyl?

Not as a direct substitute. A bonded damping mat and a limp-mass sound barrier perform different functions. Some vehicle projects use both in an appropriately designed assembly.

SPD’s Final Recommendation

We would start with a measured installation plan. Use Kilmat KLM8036 when the smaller sheet format and specified 80-mil butyl-and-foil construction suit the job. Consider the original Siless NewSLS50_52 when the listed 52-sq-ft coverage and larger pieces better match the surfaces. Neither choice should be represented as a proven head-to-head acoustic winner.

The article preserves its original Siless product-specific Amazon destination. For Kilmat, use the manufacturer specification link above to identify the model; this article does not have an independently verified original product-specific Kilmat affiliate route, so we have not invented one.

Good luck and happy soundproofing!