Damplifier Pro vs Siless Black 80 mil: Kit Size and Evidence

Second Skin Damplifier Pro and Siless Black 80 mil are both 2 mm automotive damping mats, but the amount supplied and product documentation are different. Damplifier Pro’s linked eight-sheet pack is described by retailers as 13.67 sq ft, while its stated 12 × 20 inch sheet dimensions mathematically total 13.33 sq ft. Siless Black’s linked 36 sq ft pack is a different packaging size. A thickness or area figure does not establish the decibel difference in a real car.

How we compared them: manufacturer product descriptions, model-specific reseller records and SPD’s existing two product reviews. We have not independently fitted the mats in a vehicle or tested them against one another. The exact affiliate ASINs, existing permalink and original two related reviews are preserved.

What a damping mat can change

Adhesive butyl-and-foil sheets are intended to reduce vibration and ringing in accessible metal panels. They are not a substitute for door seals, an engineered airborne-noise barrier or proper diagnosis of tire noise, wind noise and engine mounts. Performance depends on the metal panel, chosen locations, surface preparation, bonding, temperature and the surrounding vehicle assembly.

Second Skin Damplifier Pro: smaller, documented eight-sheet kit

Site-owned Second Skin Damplifier Pro review product image
Existing Second Skin Damplifier Pro review image; kit specifications are verified separately.

Second Skin’s manufacturer specification describes 12 × 20 inch, 2 mm (80 mil) elastomeric butyl sheets with a black annealed foil constraint layer, around 0.70 lb per sq ft, and a rated temperature range of −75°F to 450°F. It reports FMVSS 302 flammability and SCAQMD 1168 VOC results for its material, along with adhesion and aging tests. These are product-manufacturer statements; they do not guarantee the installed vehicle’s fire safety or sound reduction in every situation.

The exact linked B0134VHSGK appears in ASIN-matched retailer data as eight nominal 12 × 20 inch sheets. Retail listings often say “13.67 sq ft,” sometimes also “13.5 sq ft,” but eight sheets calculated from the published dimensions cover 8 × 12 × 20 ÷ 144 = 13.33 sq ft. Second Skin’s own product page rounds each sheet to 1.67 sq ft, also implying approximately 13.36 sq ft for eight. Treat the difference as a seller-description inconsistency, not hidden usable coverage.

The manufacturer states an optimal performance range distinct from its broader rated temperature range and recommends applying material to cleaned metal with a roller. If using a car in high ambient temperatures, check product-specific assembly instructions rather than treating a peak rating as permission to place mat directly against an exhaust component. The brand also offers other pack sizes, and this article’s eight-sheet evaluation should not be generalized to them.

Read the Damplifier Pro source review, or inspect the linked Damplifier Pro pack.

Siless Black 80 mil: 36 sq ft of adhesive mat

Siless Black 80 mil damping mat image from SPD's catalogued media
Site-owned media categorised as Siless Black 80 mil. Replaces an unrelated garage-curtain image formerly used here.

The Siless Black manufacturer-store page describes 80 mil (2 mm) rubber/mastic damping material intended for automotive metal. An ASIN-specific retailer record matches B07CG2YPRJ to the 36 sq ft kit. Common listings describe fourteen nominal 23.6 × 15.94 inch pieces. There are inconsistencies in reseller material categories (“rubber,” “foam”) that should not be treated as independent chemical certification; the company’s Bmastic description is a vendor formulation claim, not a peer-reviewed performance result.

Siless describes cutting, peeling and placing pieces, then rolling them into prepared sheet metal. The kit’s 36 sq ft offers more nominal untrimmed area than Damplifier Pro’s eight-piece option—approximately 2.7 times the geometry-derived 13.33 sq ft. This ratio is about coverage, not sound reduction. The linked Siless variant does not have a manufacturer-verified identical 450°F thermal rating, and it would be unsafe to copy Second Skin’s temperature claims onto Siless.

See our existing Siless Black review, or check the exact linked Siless pack.

Comparison at a glance

Criterion Second Skin Damplifier Pro Siless Black
Existing Amazon ASIN B0134VHSGK B07CG2YPRJ
Nominal thickness 80 mil / 2 mm 80 mil / 2 mm
Listed pack 8 pieces, 12 × 20 in each 36 sq ft, commonly 14 pieces
Nominal area 13.33 sq ft by dimensions; retail markets 13.67 36 sq ft advertised
Material Elastomeric butyl plus foil Bmastic-based adhesive damping mat
Published manufacturer testing Adhesion, fire and VOC test information supplied Not documented at equivalent depth for this exact listing
Independent identical-vehicle A/B trial None identified None identified

How to choose by the job

For a door treatment, trunk lid or few small panels, the eight-sheet Damplifier Pro pack is a practical starting size and comes with more transparent manufacturer material documentation. For a measured multi-door or floor project requiring more than 13 sq ft, the Siless 36 sq ft pack reduces the need to purchase additional small boxes. Neither is automatically “best” on noise performance without a test in comparable conditions.

Measure the actual accessible sheet-metal area, not the carpet dimensions or outer door size. Some car doors have window regulators, access apertures, drain holes and side-impact systems that should not be blocked. Consider panel damping as one step in a more complete acoustic treatment rather than a promise of silence.

Installation, safety and realistic expectations

  • Verify model, quantity and thickness at checkout; do not substitute a 50 mil Siless offer.
  • Dry-fit and cut pieces before removing the liner, and avoid sharp panel edges.
  • Prepare the metal as the selected manufacturer directs and firmly roll the mat to bond.
  • Keep airbags, seat anchors, drainage and moving hardware unobstructed.
  • Use approved heat shielding where needed; aluminum facing is not a universal thermal shield.
  • A manufacturer’s flammability result for a material is not a certification for an altered car or building assembly.

Frequently asked questions

Why does Damplifier Pro say 13.67 sq ft?

That is a retail listing claim. Eight nominal 12 × 20 inch sheets sum to about 13.33 sq ft, so the exact included area remains a stated discrepancy. Confirm the actual shipped variant.

Does Siless having more area make it quieter?

No. Nominal square footage tells you how much mat you can place, not the measured sound-pressure decrease in your vehicle.

Can I compare their decibel claims?

Not from these sources. There is no shared test vehicle, application map, microphone placement or acoustic method established for an equivalent head-to-head result.

Do either of these block exhaust or tire noise completely?

No. Panel vibration is only one noise path. Some sources require sealing, barrier layers or mechanical repairs.

SPD’s decision

Damplifier Pro is the better documented small-kit option for a scoped vibration-damping project; Siless Black provides a larger nominal 36 sq ft package for broader coverage. Select based on measured area, verified materials and installation constraints, not a coverage-to-decibels shortcut.

Affiliate disclosure: The Amazon links above are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Good luck and happy soundproofing!