Table of Contents
Overview
Mellroom Window Insulation Kit uses a transparent film for winter and summer window insulation. The film measures 160cm x 160cm and has a thickness of about 180㎛, 0.18mm, or 7mil.
The kit is designed to keep cold wind out and cover windows smaller than 160cm x 160cm. Also, the adhesive straps peel apart so the window can open for ventilation. It suits most kinds of windows, but it does not suit windows opened often.
This clear window insulation film offers a simple approach for covering drafty windows. Readers planning a wider window project can also review this guide to working on windows yourself.
Key takeaways
- The transparent film measures 160cm x 160cm, or 63 inches by 63 inches.
- The film thickness measures about 180㎛, 0.18mm, or 7mil.
- Installation uses adhesive loop and hook straps without a drilling tool.
- The 100% soft PE material has good tenacity and transparency.
- The film folds for future reuse and can open for ventilation.
What the product is designed to do
The kit supports window insulation during winter and summer. Also, it targets cold wind and drafts around windows.
The film fits windows smaller than 160cm x 160cm. Two pieces can connect with adhesive straps to cover a bigger window.
The film thickness is enough to agiast strong winds. In addition, the transparent material keeps the window covered while maintaining visibility through the film.
The reusable plastic window wrap suits most kinds of windows. However, it does not suit windows opened often for ventilation.
Materials, dimensions, and technical details
| Specification | Detail |
|---|---|
| Material | 100% soft PE |
| Film size | 160cm x 160cm |
| Imperial size | 63 inches x 63 inches |
| Film thickness | About 180㎛, 0.18mm, or 7mil |
| Included parts | Transparent film, adhesive loop straps, and adhesive hook straps |
| Strap width | 2.5cm, or 1 inch |
| Recommended use | Window insulation |
The soft PE material has good tenacity and transparency. Also, the film can fold for future reuse.
The film size should exceed the measured window size. Measurements should include the window frame.
Installation and placement notes
Installation uses adhesive loop and hook straps. No drilling tool is needed for this setup.
Start by measuring the window and including the frame. Next, choose film larger than the full measured area.
The film can fold 90 degrees around narrow or uneven window frames. Also, two pieces can join with adhesive straps for a bigger window.
The straps peel apart when the window needs ventilation. However, the kit does not suit windows opened often.
Outdoor placement requires extra fastening. The film should be nailed around the edges when used outdoors or on windows without glass.
Keep the material away from knives and other sharp tools. For more basic window steps, this window treatment guide covers a broader starting point.
The adhesive strap insulation kit uses a drill-free installation method for standard indoor window use.
Performance characteristics described
The film targets cold wind and drafts around windows. Also, its thickness measures about 180㎛, 0.18mm, or 7mil.
The material uses soft PE with good tenacity and transparency. It can also fold for future reuse.
The film thickness is enough to agiast strong winds. In addition, the straps support opening the window for ventilation.
The product supports both winter and summer window insulation. It also covers most kinds of windows within the stated size range.
Review patterns buyers commonly mention
Repeated buyer feedback connects the film with insulating drafty windows. Also, buyers commonly describe installation as easy.
The material often receives comments about being thick and sturdy. Buyers also connect the kit with reducing cold air and drafts.
Some repeated feedback raises concerns about adhesive or hook-and-loop strips losing stickiness over time. In addition, some buyers call installation awkward even when the steps remain uncomplicated.
The transparent window wrap draws repeated comments about draft control, material thickness, and adhesive performance.
Pros
- Uses adhesive loop and hook straps without a drilling tool.
- Measures 160cm x 160cm with a thickness of about 180㎛.
- Uses soft PE material with good tenacity and transparency.
- Folds for future reuse and opens for ventilation.
- Repeated buyer feedback connects it with drafty window insulation.
Cons
- Does not suit windows opened often for ventilation.
- Outdoor use or windows without glass require nailing around the film.
- The material should remain away from knives and other sharp tools.
- Some buyers report adhesive strips losing stickiness over time.
- Some buyers describe the installation as awkward.
FAQ
What size window does the film fit?
The film fits windows smaller than 160cm x 160cm. Also, measurements should include the window frame.
Does installation require drilling?
No drilling tool is needed. The kit uses adhesive loop and hook straps.
Can the window still open for ventilation?
The straps can peel apart so the window can open. However, the kit does not suit windows opened often.
Can the film cover a larger window?
Two pieces can connect with adhesive straps to cover a bigger window.
Can the film be reused?
The material can fold for future reuse. It should remain away from knives and other sharp tools.
Can the film be used outdoors?
Outdoor use requires nailing around the film. The same step applies to windows without glass.