Rockville ROCKMAT 37-15 and Siless Black 50 mil are both peel-and-place automotive panel-damping materials, but their linked packs differ in thickness, coverage, and included tools. ROCKMAT is a 60 mil (1.5 mm) butyl-and-aluminum kit with fifteen 20 × 18 inch sheets and a roller. Siless Black is a nominal 50 mil mastic-based mat sold as a 52 sq ft pack. The larger area does not, by itself, prove a louder or quieter car.
First, identify the job these materials perform
These are constrained-layer or adhesive panel-damping products. Their primary role is to reduce vibration and ringing in suitably prepared metal panels. That differs from creating a complete airborne-noise barrier, adding thick thermal padding or sealing the door perimeter. Neither product comes with independent side-by-side vehicle test data showing which one reduces cabin noise more.
Choose by available surface area, required handling and vehicle clearance. Do not treat 60 mil versus 50 mil as a numerical measure of finished soundproofing performance.
Rockville ROCKMAT 37-15 — 37.5 sq ft, roller included

The Rockville manufacturer specification identifies model ROCKMAT 37-15 as fifteen pre-cut sheets measuring 20 × 18 inches each. The total is 15 × (20 × 18 / 144) = 37.5 sq ft, before trimming. Rockville lists 1.5 mm (60 mil) thickness, a virgin butyl-rubber composition with reinforced aluminum, a patterned adhesion indicator and an included wood-and-steel installation roller. It also publishes an adhesive service-temperature range of −14°F to 320°F. These are manufacturer specifications, not permission to put the mat directly against an exhaust or engine hot spot.
The linked Amazon option B0DWGWLSBM is independently associated with the model ROCKMAT 37-15 in an ASIN-specific reseller listing. Confirm that a prospective order includes the advertised fifteen sheets and roller, as Rockville also sells other sizes and packs.
ROCKMAT may appeal to a buyer who wants a ready-to-roll kit for several door skins, a floor or a trunk. The modest-sized sheets reduce the need to wrestle a long adhesive roll through interior shapes, but they create more edges and require measuring. See the standalone ROCKMAT review, or check the linked ROCKMAT kit.
Siless Black 50 mil — 52 sq ft of damping material

An ASIN-specific specification record links B07B794KNH to Siless Black, model NewSLS50_52, advertised as a 52 sq ft pack at 50 mil thickness. Listed individual sheet dimensions include approximately 23.6 × 15.94 inches. Retailer descriptions identify a rubber or Bmastic-based adhesive damping composition; they do not consistently document a standardized acoustic test for this exact listed package. Avoid translating advertising such as ’20–30% better’ into an independently proven result.
The Siless pack contains more nominal area than ROCKMAT: 52 − 37.5 = 14.5 sq ft more, a 38.7% increase relative to ROCKMAT’s listed coverage. This says nothing on its own about measured damping, temperature endurance, installed weight or quality. Siless descriptions emphasize trim, peel, place and roll, with no additional liquid glue required. A separate applicator may still be useful; the linked variant does not have ROCKMAT’s manufacturer-confirmed roller bundle.
Read the Siless Black product overview, or inspect the exact Siless Black listing.
Specification and buying comparison
| Factor | ROCKMAT 37-15 | Siless Black NewSLS50_52 |
|---|---|---|
| Linked ASIN | B0DWGWLSBM | B07B794KNH |
| Nominal thickness | 60 mil / 1.5 mm | 50 mil / approx. 1.27 mm |
| Advertised area | 37.5 sq ft | 52 sq ft |
| Typical sheet | 20 × 18 in, 15 pieces | Approx. 23.6 × 15.94 in; check delivered count |
| Manufacturer-described construction | Virgin butyl with reinforced aluminum | Adhesive rubber/mastic damping compound |
| Included roller | Yes, manufacturer-confirmed | Not established for this ASIN |
| Manufacturer temperature statement | Adhesive range −14°F to 320°F | Exact-ASIN range not verified |
| Independent comparable acoustic test | Not identified | Not identified |
Where each option makes sense
Choose ROCKMAT if the 37.5 sq ft quantity fits your measurements and you would value a packaged roller. It can be easier to handle in sections, particularly in vehicle doors. Choose Siless Black if your measured project requires a larger amount of nominal damping material and you already have appropriate installation tools. Neither should be bought by headline thickness alone.
When working on a car, measure accessible sheet metal after allowing for windows, trim clips, wiring, drain holes and safety systems. A large stated pack area does not mean every square inch of a door can or should be covered.
Installation and safety guidance
- Remove loose material, degrease and dry the panel before applying adhesive.
- Dry-fit and trim pieces first, avoiding drains, window mechanisms, harnesses and airbag locations.
- Use the supplied or recommended roller to apply even pressure; air pockets reduce reliable bonding.
- Observe the manufacturer’s temperature and vehicle-specific safety instructions. A foil top does not make a mat an exhaust shield.
- Test fit trim before full reassembly and avoid covering necessary fasteners or service access.
Questions buyers ask
Is 60 mil automatically better than 50 mil?
No. Thickness is one dimension of two differently formulated products. Compare construction, adhesion, coverage, installation and valid test results rather than treating mils as decibels.
Can either material stop voices passing through a wall?
They are marketed primarily for damping resonant surfaces in vehicles. A complete wall isolation system requires assembly design, airtightness, mass and decoupling decisions beyond these two mats.
Is there a verified vehicle noise-reduction percentage?
No controlled head-to-head vehicle study was identified for these exact ASINs. Any vendor ‘quieter cabin’ statements are marketing context, not guaranteed comparative results.
Does the Siless pack include a roller?
The verified ROCKMAT specification includes one. A roller is not confirmed as part of the exact Siless 52 sq ft kit; inspect the current offer contents before ordering.
SPD’s decision
For a smaller multi-panel automotive job, ROCKMAT 37-15 combines a clearly enumerated 37.5 sq ft kit with its own roller. Siless Black is a reasonable comparison when the project calls for roughly 52 sq ft of the listed 50 mil damping material. Choose by installation constraints and source-backed specifications, not an invented winner on noise reduction.
Affiliate disclosure: The Amazon product links above are affiliate links. As an Amazon Associate I earn from qualifying purchases.
Good luck and happy soundproofing!