X AUTOHAUX vs Storystore: 10 mm Mat Coverage and Limits

Introduction: Compare the Exact 10 mm Options

Quick answer: X AUTOHAUX and Storystore both sell nominal 10 mm (394 mil) automotive insulation mats, but the linked variants differ in coverage. X AUTOHAUX ASIN B0DDKJH9VY is listed as one 50 × 40 cm (19.69 × 15.75 inch) sheet covering about 2.16 sq ft. Storystore ASIN B0D3H4DJFX is advertised as a larger approximately 39–39.37 × 60-inch sheet, with 16.5 sq ft of seller-stated coverage. Equal nominal thickness does not prove equal acoustic, thermal or adhesive performance.

Method and affiliate disclosure: This editorial comparison uses published brand and retailer specifications and existing Soundproofing Dude reviews; it is not a hands-on installation or controlled laboratory test. Sponsored Amazon links may earn a commission on qualifying purchases at no extra cost to you. Verify the exact seller variant and current fit and safety instructions before ordering.

What Actually Matters When Choosing

Measure the installation area first. Consider the number of separate sheets, seams and trim clearances; the exact composition of the foil and foam; temperature limits and fire documentation; adhesive preparation; and accessibility of wiring, drains, air passages and latches. Marketing claims about decibel reduction, heat resistance or fuel savings require exact-product test data before they can be relied upon. A reflective foam liner serves a different role from a constrained-layer butyl vibration damper or a dense airborne-noise barrier.

X AUTOHAUX: Smaller Sheet for Targeted Areas

Product image accompanying the X AUTOHAUX automotive insulation mat review
Existing X AUTOHAUX review image; not evidence of a tested noise-reduction or temperature rating.

The ASIN-matched retailer record describes X AUTOHAUX B0DDKJH9VY as a single 50 × 40 cm, 10 mm sheet, approximately 2.16 sq ft, for localized automotive or engine-cover installation. Its material is marketed as reflective aluminum-faced insulation.

The X AUTOHAUX brand’s broader 10 mm range advertises other coverage sizes and aluminum-foil/closed-cell-foam construction. Do not copy specifications from another size or model to this exact ASIN. A smaller sheet may simplify a localized repair but means more seams and possible additional packs if a larger area must be covered. The brand warns against direct contact with exhaust pipes, mufflers or hot pipes. Dry-fit and clean the approved substrate before removing adhesive backing.

Storystore: Larger Seller-Listed Coverage

Product image accompanying the Storystore 10 mm foil-faced automotive insulation review
Existing Storystore review image. Confirm material, sheet size and included accessories at checkout.

The ASIN-specific retailer listing identifies Storystore B0D3H4DJFX as nominally 10 mm/394 mil and approximately 39–39.37 × 60 inches, marketed as 16.5 sq ft with aluminum-and-foam construction and adhesive backing. Model and roller/accessory fields vary across retailer records, so confirm the supplied configuration rather than assuming a roller comes with it.

The arithmetic behind the advertised coverage is approximate: 39 × 60 ÷ 144 = 16.25 sq ft; 39.37 × 60 ÷ 144 ≈ 16.40 sq ft. Those numbers differ from the advertised 16.5 sq ft and are calculated from rounded dimensions—not measured usable installed coverage. Trimming, holes and overlaps reduce the effective area. A broad sheet can limit seams, but is less convenient where only a very small or irregular patch is required.

Side-by-Side: Stated Facts, Not Invented Test Results

Both are marketed for automotive noise/heat applications. Neither linked product has a common independently verified sound- or heat-performance test available to us; product names containing “sound deadening” must not be interpreted as certified sound-isolation performance. Buyer-intent searches often mix thermal foam liners, butyl vibration-control mats and mass-loaded sound barriers. Those address different mechanisms.

For context, Second Skin’s technical explanation separates foam decoupling from structural vibration damping and airborne noise blocking. That supplier’s claims are context, not comparative results for either X AUTOHAUX or Storystore.

At-a-Glance Comparison

Attribute X AUTOHAUX B0DDKJH9VY Storystore B0D3H4DJFX
Advertised thickness 10 mm / 394 mil 10 mm / 394 mil
Listed sheet size 50 × 40 cm (19.69 × 15.75 in) Approximately 39–39.37 × 60 in (retailer dimensions differ)
Stated coverage About 2.16 sq ft, one sheet Advertised 16.5 sq ft, one large sheet; rounded face math 16.25–16.40 sq ft
Listed material Reflective aluminum-faced insulation; related brand range describes foil and closed-cell foam Aluminum and foam; exact composite/adhesive specifications unverified
Installation Trim-to-fit adhesive sheet, localized vehicle applications Trim-to-fit adhesive sheet, broader vehicle-panel applications
Roller/accessories ASIN-matched listing states roller not included Retailer fields conflict; verify package components
Independent comparative STC/NRC/dB/heat test Not established for this ASIN Not established for this ASIN

Which Is the More Suitable Purchase?

  • X AUTOHAUX: Consider for a smaller localized, approved hood, fender or engine-cover panel area where the exact 50 × 40 cm sheet fits and clearance is sufficient.
  • Storystore: Consider for a large, manufacturer-approved surface when fewer seams and broader coverage are more important than having a small pre-sized sheet.
  • Neither: If the requirement is a verified cabin decibel reduction or fire-rated engine compartment installation, request relevant exact-product lab, temperature and safety documentation and diagnose the noise path before buying.

Never cover ventilation openings, wiring, drains, latches or hot exhaust parts. Do not infer actual adhesive heat resistance from “heatshield,” “waterproof,” “flame retardant,” or fuel-savings wording on a seller listing. The Storystore foam-versus-butyl comparison covers another material-role distinction.

Frequently Asked Questions

Are both mats 10 mm thick?

The exact linked retailer variants each advertise nominal 10 mm/394 mil thickness. This is a seller-stated dimension, not independent measurement or acoustic equivalence.

Why does Storystore say 16.5 sq ft when dimensions calculate differently?

The seller dimensions are rounded or inconsistent across feeds. The 39–39.37 × 60-inch figures calculate to approximately 16.25–16.40 sq ft before trimming, so confirm the size delivered.

Will either mat make a vehicle quieter by a guaranteed number of decibels?

No comparable independent product-specific measurement was established for these exact ASINs. Installation, vehicle structure, placement, and dominant noise source all affect outcomes.

Can these sheets contact exhaust or other hot pipes?

Do not assume so. X AUTOHAUX specifically cautions against direct installation on exhausts and hot pipes; verify each chosen product’s application and fire/temperature instructions before use.

Closing Guidance and Original Product Reviews

Measure the intended surface, account for trimming and choose the correct size and material role; do not use thickness alone as a proxy for sound blocking. Read the original published X AUTOHAUX review and Storystore review for more background, then verify the exact product pages and current installation documentation.

Good luck and happy soundproofing.